11 equipment types certified in this category. Each entry below lists the standards we examine against, the re-inspection interval, and what the checklist covers.
Wire rope slings examined every six months against ISO 4309 discard criteria and re-tagged with the current colour code.
Polyester flat and round slings examined for cuts, abrasion, UV damage and label legibility, then colour coded.
Grade 80 and 100 chain slings measured for elongation and wear, with master link and hook examination.
Bow and dee shackles examined for body and pin wear, correct matched assembly and legible WLL marking.
Eyebolts and swivel hoist rings examined for thread condition, seating and rated angular loading.
Spreader and lifting beams proof loaded and examined including weld condition and marked centre of gravity.
Hooks and hook blocks measured for throat opening and twist, with latch and sheave examination.
Turnbuckles examined for thread engagement, body distortion and locking arrangements.
Plate and beam clamps examined for jaw and cam wear, spring function and marked grip range.
Magnetic and vacuum lifters tested for holding force with back-up power and alarm verification.
Welded padeyes and permanent lifting points examined and, where specified, proof loaded with NDT of the welds.